How To Remove Razor Blade

Download Article

Download Article

It's non difficult to safely remove the bract from a safety razor. If you apply a safety razor, you need to modify the blades frequently to brand sure you lot're getting a shut shave.^[one] However, if you're having thoughts about harming yourself, talk to someone who y'all trust or call the National Suicide Prevention Hotline at i-800-273-8255.

Steps

1. ane

   Supplant the blade when yous experience tugging or pulling as y'all shave. Sometimes, it'due south difficult to tell when to change the blade in a safe razor. Pay attention to the start few strokes of your shave. If it feels like the blade is pulling on your hair, it's time to change the blade!^[2]

   • If you notice that after you shave your face feels irritated or there are razor bumps and marks, this is a sign you should modify the blades before you shave again.^[3]
   • Never test the the blade on your hand, y'all can cut yourself or damage the razor if it isn't already dull.

2. two

   Twist the handle of the razor counterclockwise to expose the blade. Concord the handle in your dominant hand and use the other mitt to hold the head of the razor. Then, rotate the handle to the left until the head begins to the separate from the handle or the acme of the head opens upwardly to reveal the blade, depending on the razor.^[4]

   • There are a few dissimilar types of safety razors, and the blade comes out differently on some of them. Pay attention to the head of the razor every bit you lot're twisting the handle.
   • Be conscientious not to tip the razor on its side or hold it upside-down. The razor can autumn out of the head easily in those positions.

   Advertisement

3. 3

   Remove the current bract from the head of the razor. Carefully using your fingers or a butter knife, elevator the side of the blade to have it out of the head. Try to avert touching the sharp edges of the blade as you lot remove it.^[5]

   • When you remove the blade, yous can recycle it to reduce waste matter!

4. four

   Place a new blade into the open slot in the head. Select a new bract to supersede the old i, and carefully slide it into the slot on the caput. The blade will normally accept words or arrows printed on it to ensure that information technology's facing the right management.^[6]

   • If you don't have a holder or cartridge for your actress blade, exist very careful when handling the blade.

5. five

   Twist the handle clockwise to close the head and secure the bract. Once the bract is in the razor, supervene upon whatsoever parts that might cover the bract, and twist the handle the opposite management to tighten the head. Carefully tilt the razor onto its side to ensure that the blade is secure and won't fall out of the head.^[7]

   • Some handles will lock into place once the head is completely secure, merely most will not.

Advertisement

Ask a Question

200 characters left

Include your email accost to become a message when this question is answered.

Submit

Ad

• If you're having thoughts well-nigh harming yourself, talk to someone who you trust or call the National Suicide Prevention Hotline at one-800-273-8255.

• Go along razors and blades out of the reach of small children and pets.

Advertisement

About This Article

Article Summary 10

If you lot want to remove a damaged blade from a razor start by holding the flame of a lighter to each side of the razor for 15-twenty seconds to soften the plastic around the blades. So, grip one of the blades with a pair of needle-olfactory organ pliers, and pull on the blade with the pliers until information technology comes out. One time the first blade comes out, repeat the process with the rest of the blades, reheating the plastic afterwards y'all take out each blade.

Nonetheless, if you're thinking well-nigh removing blades from a razor in order to impairment yourself, remember that you're loved. Try talking to someone y'all dearest about how you're feeling or, if you feel like you have no one to talk to, telephone call 1-800-273-8255.

Did this summary help you?

Thank you to all authors for creating a page that has been read 235,365 times.

Did this article assistance you?

Source: https://www.wikihow.com/Remove-Blades-from-a-Razor

Share this post